修复你的物品 社区 商店

Plastic Phone Case Crack/Break Repair

简介

If your phone case has any cracks from wear and tear or is completely broken into an unusable condition, use this guide to repair it. Bonding agents, like epoxy, are strong enough to restore the structural integrity of protective phone cases. Rather than throwing it away and contributing to plastic waste, fixing phone cases can help keep landfills clean of toxic microplastics. Aside from providing a more economic solution, this repair guide also allows for the repair and reuse of damaged phone cases that would otherwise be discarded into the environment.

你所需要的

  1. Plastic Phone Case Crack/Break Repair, Plastic Phone Case Crack/Break Repair: 步骤 1 中的图像 1，3 Plastic Phone Case Crack/Break Repair, Plastic Phone Case Crack/Break Repair: 步骤 1 中的图像 2，3 Plastic Phone Case Crack/Break Repair, Plastic Phone Case Crack/Break Repair: 步骤 1 中的图像 3，3

    • Clean the cracked area of your phone case with a microfiber towel.

    编辑

  2. Plastic Phone Case Crack/Break Repair: 步骤 2 中的图像 1，2 Plastic Phone Case Crack/Break Repair: 步骤 2 中的图像 2，2

    • Sand down the area until smooth.

    编辑

  3. Plastic Phone Case Crack/Break Repair: 步骤 3 中的图像 1，3 Plastic Phone Case Crack/Break Repair: 步骤 3 中的图像 2，3 Plastic Phone Case Crack/Break Repair: 步骤 3 中的图像 3，3

    • Inject JB Weld epoxy into the provided mixing tray or a container of choice.

    • Use a disposable stick to mix the two elements into a homogeneous solution.

    编辑

  5. Plastic Phone Case Crack/Break Repair: 步骤 4 中的图像 1，2 Plastic Phone Case Crack/Break Repair: 步骤 4 中的图像 2，2

    • Use tape to hold the cracked or broken pieces firmly in place, ensuring the edges stay aligned maximizing contact.

    编辑

  6. Plastic Phone Case Crack/Break Repair: 步骤 5 中的图像 1，3 Plastic Phone Case Crack/Break Repair: 步骤 5 中的图像 2，3 Plastic Phone Case Crack/Break Repair: 步骤 5 中的图像 3，3

    • Grab a small stick or any disposable tool.

    • Generously apply the mixed epoxy along the crack. Make sure to get some epoxy on the internal broken edges.

    编辑

  7. Plastic Phone Case Crack/Break Repair: 步骤 6 中的图像 1，1

    • Once applied, wait 15 minutes for the epoxy to set.

    • Test epoxy strength.

    编辑

  8. Plastic Phone Case Crack/Break Repair: 步骤 7 中的图像 1，1

    • Remove the tape holding the phone case together after the epoxy has cured for long enough for the bonded pieces to stay together.

    编辑

  9. Plastic Phone Case Crack/Break Repair: 步骤 8 中的图像 1，2 Plastic Phone Case Crack/Break Repair: 步骤 8 中的图像 2，2

    • Apply epoxy to other side of phone case crack.

    编辑

  10. Plastic Phone Case Crack/Break Repair: 步骤 9 中的图像 1，3 Plastic Phone Case Crack/Break Repair: 步骤 9 中的图像 2，3 Plastic Phone Case Crack/Break Repair: 步骤 9 中的图像 3，3

    • Wait for 30 minutes for epoxy to cure fully before sanding.

    • Sand the bonded section until smooth.

    • Repeat on the inner side of phone case.

    编辑
终点

作者

与3其他贡献者

StephenH

于04/14/25注册

169 声望

撰写一个指南

徽章: 2

团队

UC Davis, Team 1-6, Morris Spring 2025 UC Davis, Team 1-6, Morris Spring 2025 的会员

UCD-MORRIS-S25S1G6

3 名成员

创作了1篇指南

0指南评论

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 5

过去 30 天： 27

总计 54

OSZAR »