跳到步骤＃3
由 Blake Klein — 编辑
编辑已通过 由 Blake Klein
- 之前
- 之后
- 不变
步骤行
| - | [* red] Using a plastic tool, push the latches away from the RAM. |
|---|---|
| - | [* black] The RAM will then lift up on its own and the latches will spring back into place. |
| - | [* black] This will only release the RAM stick that is on top. Repeat these steps again to release another RAM stick. |
| + | [* red] Spread the clips away from the RAM module. |
| + | [* icon_note] When released, the RAM module will pop up at a slight angle. |