Logitech MX Master 3S Mouse Feet Replacement

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的4指南。

下一步

正翻译步骤 1

英语

中文

步骤 1

Logitech MX Master 3S Mouse Feet Replacement, Soften the mouse feet adhesive: 步骤 0 中的图像 1，3

Logitech MX Master 3S Mouse Feet Replacement, Soften the mouse feet adhesive: 步骤 0 中的图像 2，3

Logitech MX Master 3S Mouse Feet Replacement, Soften the mouse feet adhesive: 步骤 0 中的图像 3，3

Soften the mouse feet adhesive

Flip the mouse's power switch into the OFF position, unplug any cables, and flip it over so the feet are facing up.
The unique shape of some mice can prevent them from laying flat. If you need to, lay your mouse on a soft towel to prevent wobble.
If you're planning to reuse your existing mouse feet, note that the adhesive needs to be thoroughly heated for them to be cleanly removed.
Heat an iOpener and apply it to each of the mouse feet for about one minute each.
Alternatively, you can use a hair dryer to soften the mouse feet adhesive.
When using a hair dryer, don't heat the feet for more than a couple seconds at a time—anything hotter than just warm to the touch risks melting or warping the plastic lower case.
The information sticker adhesive may soften during this step, but you don't need to remove it.

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。

	
		OSZAR »