修复你的物品 社区 商店

Steam Deck 電池更換

上一步 下一步

正翻译步骤 7

返回指南
英语
中文
步骤 7
Steam Deck Battery Replacement, Heat the battery adhesive: 步骤 0 中的图像 1，3 Steam Deck Battery Replacement, Heat the battery adhesive: 步骤 0 中的图像 2，3 Steam Deck Battery Replacement, Heat the battery adhesive: 步骤 0 中的图像 3，3
Heat the battery adhesive

  • The battery is strongly adhered to the Steam Deck. The adhesive loosens with constant, steady force, and it will require repeated heating and prying cycles.

  • Heating a charged battery is a fire hazard. Make sure you've completely discharged your battery before starting this step.

  • Don't reuse the battery after it's been removed, as doing so is a potential safety hazard. Replace it with a new battery.

  • Use a heat gun to heat the adhesive underneath the battery for 1-2 minutes.

  • Alternatively, a hair dryer may also be used.

  • Try your best to not overheat the battery or surrounding plastic components. Keep the heat gun or hair dryer ~2 inches above the battery and constantly moving at all times—don't keep it heating one place for too long.

  • Although high-concentration isopropyl alcohol (>90%) may be an effective method to loosen this adhesive, there's a high risk of excess leaking onto or into the display or other components through the cutouts on the battery tray.

加熱電池以軟化電池膠

Steam Deck的電池使用黏性極強的電池膠進行固定，要將電池取下，需要不斷的加熱軟化電池膠，以及翹起電池多次

還有電的電池加熱有可能 造成火災，請確認裝置已經 完全放電再開始步驟

請不要使用重複使用更換下來的電池，加熱後的電池有安全隱患，請更換新電池

使用熱風槍對電池加熱一到兩分鐘，以軟化電池膠

沒有熱風槍也可以用吹風機代替

盡可能不要過度加熱電池及電池週邊的塑膠組件，並將吹風機或熱風槍隔電池約5公分（2英吋），請不要長時間只加熱同一處，建議繞圈加熱使電池能夠均勻的加熱

高濃度異丙醇（>90%）雖然可能是一種有效軟化電池膠的方法，但通過電池托盤上的切口，存在著高度的液體滲漏風險，這可能會滲漏到顯示屏或其他元件上或內部。

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。

OSZAR »