Google Pixel Fold 基座前镜头更换

上一步

正翻译步骤 3

英语

中文

步骤 3

Remove the front camera

Grab the front camera by the neck of its connector, as close to the camera body as possible.
Don't press down on the press connector's pins, as you may bend them.
Pull straight up to separate the adhesive and remove the front camera.
During reassembly, if your adhesive is still sticky and intact, you can reuse it. Otherwise, follow this guide to replace it with custom cut strips.
If you don't have custom cut adhesive strips, use double-sided tape, like Tesa Tape, to secure the front camera to the frame.

移除前镜头

抓住前镜头接口的中部，尽量靠近镜头。
不要直接抓住接口，可能会损坏接口内部的针脚。
竖直向上拉动，分离粘胶，取出前镜头。
在组装时，如果粘胶没有缺损且仍有粘性，则可以继续使用。否则，请参照本指南更换粘胶。
如果没有提前准备粘胶，可以使用双面胶带，例如Tesa Tape，将前镜头固定在机身边框上。