简介
当手柄不能正常运行时，您可能需要更换底部主板。该过程可能涉及到部分需要焊接的操作，您可以参考这个关于电路板焊接的教程。 本指南将向您展示如何取出Xbox One 无线手柄（1708型） 底部主板。
你所需要的
-
-
-
从底部主板中心取下三个 70mm torx-6 螺丝。
-
从震动马达边上的底部主板上取下两个 70mm torx-6 螺丝。
-
从底部主板左侧取下一个 70mm torx-6 螺丝。
-
需要恢复您的设备？倒序执行本指南即可
需要恢复您的设备？倒序执行本指南即可
29等其他人完成本指南。
团队
Cal Poly, Team S18-G3, Forte Fall 2017 Cal Poly, Team S18-G3, Forte Fall 2017 的会员
CPSU-FORTE-F17S18G3
4 名成员
创作了37篇指南
14指南评论
Just to clarify you don’t need to do any soldering. If you are careful enough with the top mobo and rumble motors the wires should stay connected and you can take out the bottom mobo fairly easily. I saw some youtube videos that imply that you do need to disconnect and solder them back. Not the case!
What is the wire that connects the two motherboards together with the copper adaptor for? When taking mine apart, the wire came loose from that tiny copper piece and is unrepairable. I think it's for the Bluetooth functionality. The wire used looks to have a very tiny wire inside itself surrounded with what looks to be ground wire. It's the black one in the middle.
It will clip back into place if you align it properly.its similar to the antenna clip of motherboard in a iPhone 4 you don’t need to solder it just lift and be careful when reattaching it don’t force it if it bends you are screwed. But when lined up right minimal pressure will snap back into place.
I’ve tried many different angles and pressures to get that thing back in, the pin doesn’t look bent but it just won’t go back in.
