简介
吸锡泵（也叫拆焊枪）是用来清除焊锡的利器。您可以用它来移除PCB板上的通孔式锡焊元件，或者重新焊接不满意的锡焊。
本教程旨在教授如何使用iFixit出品的吸锡泵。在操作过程中您可能还需要使用吸锡带清理残余的焊锡。若您对吸锡带的使用还不熟悉，请先点击此处学习如何使用吸锡带。
你所需要的
-
-
在这个步骤中使用的工具：Solder Wick Braid$4.99
-
压下吸锡泵活塞杆，备用。
-
将焊点的焊锡加热至熔融的液体状态。在烙铁头上挂适量焊锡有助于热能的传导。
-
将吸锡泵的吸咀尽可能贴近熔融的焊点。
-
按下侧边钮，吸走熔融的焊锡。
-
重复以上操作直到焊点清理干净为止。也可以使用吸锡带辅助清除残余的焊锡。
-
-
-
清理吸锡泵，通常只需要简单空放几次即可。此操作可以让吸锡泵内的清洁通杆疏通吸咀，使它不至于被废焊锡堵塞住。
-
用手捏住吸咀的金属滚花部分。
-
朝逆时针方向拧即可取下吸咀。由于吸咀内有O型密封圈，拧的时候可能会略费力。
-
移除吸咀并仔细清理泵体内部。
I hadn’t used my pump for a while so it wasn’t zooming up the tube like it used to (despite numerous tries). So, I simply unscrewed the nozzle and dripped a bit of fine oil into the tube. I replaced it and operated it a couple of times…BINGO….best it ever worked. I was totally surprised and glad I didn’t have to buy a replacement. BTW - I happened to have some Starrett tool oil on hand and that’s what I used. Any thin oil should be fine and you don’t need very much.
That’s a great tip Keith!
What is the best way to clean sthe older with when it is in the pump?
-
74等其他人完成本指南。
4指南评论
Good review, but I’ve found that these small solder suckers don’t do a very good job. The much larger “Soldapult” (https://www.edsyn.com/product/DS017.html) provides much more suction and can often completely clear a joint in one use.
How does the tip not melt.
Apply higher temperature on your soldering iron, above 380°C.
Use bigger tip, bigger heating surface provides more effecitive heat transfer.
If you are asking about why the tip of the solder sucker doesn't melt, it is made of a heat resitant material. Notice the word resistant.
